On this page

Material means relevant to compliance

Under the Consumer Product Safety Commission (CPSC) rule, changes in design, manufacturing or component sourcing can be material when they could affect compliance with applicable children’s-product safety rules. A different supplier or a different component from the same supplier can matter.

The rule permits reliance on earlier testing plus changed-component testing only where the stated conditions are met: the change does not affect other components or the finished product’s compliance with other applicable rules. It is not automatic permission to test only the cheapest part.

Sources: Consumer Product Safety Commission; eCFR: 1107.23(a)–(d): material-change trigger, test/certificate sequence and limited component-testing conditions U.S. Consumer Product Safety Commission: FAQ: material-change definition; testing and new CPC; conditions for component-only testing

The same colour does not establish the same component

Fictional example: a children’s-product supplier offers a substitute plastic handle, described as the same colour and shape. Purchasing likes its shorter lead time. The compliance file contains reports for the original component and finished product.

Before releasing the change, management needs the actual composition/source information and a qualified assessment of which requirements could be affected. A visual match cannot establish that the old evidence covers the replacement. No particular test or safety conclusion is prescribed here.

Link the proposed change to evidence

Technical approval and regulatory testing are connected decisions, but neither replaces the other. Record both before treating the changed version as ready.

RecordQuestion to answer
Exact changeWhich material, supplier, design or process differs from the certified version?
Affected requirementsWhich applicable rules could the change affect, including through interactions?
Testing basisWhich new testing is needed and which earlier results can properly remain relevant?
Changed-product certificateWho verifies the passing evidence and issues the correct new CPC?
Production identificationHow will changed goods be distinguished from the earlier version?

Put the evidence beside the delivery decision

Ask management to show the supplier’s change notice, the affected-rule assessment, the testing status and the correct product/version on the certificate. Keep unanswered scope questions visible instead of copying the old report into a new folder.

Assign the work before promising the changed goods’ delivery date. The launch worksheet can track responsibility; it does not decide the testing or store the technical certificate file.

Scope

  • Selected children’s-product rule only. The fictional component change is not a safety finding, test plan, sampling instruction or approval of component-only testing.

Next step

Use Launch dependencies to assign the material-change assessment, required evidence and changed-product certification before release. Keep reports and version records in the controlled product file.

Sources & review notes

Access dates show when a source was retrieved. Review dates show when its meaning was checked. Editing this guide does not recheck the law.

16 CFR 1107.23 — Material change

Consumer Product Safety Commission; eCFR

Passage, dates and research notes

regulation · 1107.23(a)–(d): material-change trigger, test/certificate sequence and limited component-testing conditions

Accessed: 2026-11-16T10:36:07.951035+00:00 · Meaning reviewed: 2026-11-16T10:41:48.064129+00:00 · Next review target: 2026-12-16

Read the complete displayed section. The article does not choose a test method, sample number, actual changed-product scope or a certification outcome.

Material Change Testing

U.S. Consumer Product Safety Commission

Passage, dates and research notes

official-guidance · FAQ: material-change definition; testing and new CPC; conditions for component-only testing

Accessed: 2026-11-16T10:36:59.369172+00:00 · Meaning reviewed: 2026-11-16T10:41:48.064129+00:00 · Next review target: 2026-12-16

Read the complete FAQ body. Used to explain the change-to-testing connection, not its toy example or any standard testing frequency.

Detailed rule records (1)
Assess changed children’s products before reissuing certification Depends on the facts

Section 1107.23 requires sufficient third-party testing and a new Children’s Product Certificate after a material change. Earlier tests plus changed-component tests may support a new certificate only under the stated limited-effect and due-care conditions.

When to check: A children’s-product design, manufacturing process or component-source change that could affect applicable-rule compliance. Source review: 2026-11-16.

16 CFR 1107.23 — Material change Material Change Testing
Your learning

Bookmark this guide or mark it as read.

Learning library
Progress privacy

Saving is off by default. Without it, progress lasts only on this page. If you turn it on, this browser profile stores public content IDs and the progress you record. Anyone sharing the profile could see them. No plan inputs or contact details are included. Reset or export in learning settings.

This is a reading aid, not evidence of disclosure delivery, expertise or legal approval.